 |
Biomechanical analysis of multiple implants |
| 1. Numerical Models of Implants | |
| 2. Axial Symmetrical Models | |
| 3. Three Dimensional Models | |
| 4. THREE DIMENSIONAL MODELS OF AN IMPLANT SYSTEM | |
An elementary example of tomography relief is reported in Fig. 1 and Fig. 2. Tomographic data represent the basis for the following procedure of solid and numerical modelling. |
|
| IMPLANT |
NOTES |
| 3D_bar_1 | tomographic images |
| 3D_bar_2 | three dimensional representation of contour curves from tomographic data |
| 3D_bar_3 | three dimensional representation of contour curves from tomographic data |
| 3D_bar_4 | 3D virtual solid model |
| 3D_bar_5 | rapid prototyping |
| 3D_bar_6 | 3D finite elements model |
| 3D_bar_7 | displacement magnitude (mm) |
| 3D_bar_8 | displacement magnitude (mm) |
| 3D_bar_9 | displacement magnitude (mm) |
|
|
|
Fig. 1
Fig. 2